340
Amphenol Corporation Tel: 800-627-7100
www.amphenolrf.com
Assembly Instructions-C75
Amphenol
®
MCX
STRAIGHT CONNECTORS FOR SEMI-RIGID CABLE
Step 1
Prepare cable according to diagram. Remove burrs from
outer/inner conductors of cable.
Step 2
Solder center contact “a” to inner conductor of cable using
Sn60 solder. Contact must butt on dielectric of cable as
shown.
Step 3
Insert contact into body assembly “b” as shown. Holding
body and cable firmly, apply heat as shown and feed solder
(Sn-60) as indicated. Allow to cool. The dimension from the
contact tip to the end of the body should be .006 ±.007.
Contact
Connector Body
APPLY HEAT
FEED SOLDER HERE
CONTACT MUST BUTT HERE
c
d
a
b
Amphenol
Connector
Cable
Stripping Dimensions, inches (mm)
Number
Type
RG-/U
c
d
919-114J-51SX
Straight Jack
.086 Semi-Rigid
.118
.039
919-120P-51SX
Straight Plug
.086 Semi-Rigid
.100
–
