HELP GUIDE
IMPORTANT NOTE:
Please read the instruction manual carefully before operating
the equipment. It is possible to maintain the performance of the splicer &
cleaver for a long time with proper cleaning and maintenance.
This Help Guide refers to the more common problems experienced.
Fujikura FSM-70S
Fusion Splicer
Product Type FKFSM70S
All of the above errors can occur if the electrodes have not been stabilised or
calibrated to the ambient conditions. An electrode stabilisation should be carried out at
the beginning of every splicing session and any time the ambient conditions change.
Note these errors can also be caused if the fibres are not prepared correctly.
1
BUBBLES/HIGH LOSS/FIBRE PULLING APART DURING PROOF TEST:
