background image

SAVONA ELITE™ 6’

WHIRLPOOLS BY AMERICAN STANDARD

HIGH GLOSS ACRYLIC

SAVONA ELITE™ 6’ WHIRLPOOL

Comfortable two person design with generous
back support positions andf molded-in armrests

2901E (specify White 020, Bone 021, or

Linen 222)

• Acrylic with fiberglass reinforcement
• 2.0 HP self-draining pump/motor

with dry run seal

• Ten multi-directional and flow adjustable 

jets including:
Two high performance Ideal-flow™ Jets
Eight interchangeable Flex-jets™

• Three silent air volume controls
•  Deck-mounted On/Off control
•  Complete factory installed and tested

whirlpool system

2901EC (specify White 020, Bone 021, or

Linen 222)

• Same as above with the StayClean™

whirlpool system featuring Antimicrobial
AlphaSan®

Nominal Dimensions:  71-1/4” x 43-1/2” x 22"
(1810 x 1105 x 559mm)

© 2003 American Standard Inc.

HD-005

Revised 10/03

SPS 2901E

Components Needed:

Bath Filler*:  (specify finish)

Bath Drain:  BATH-DRAIN 
(specify Chrome 002, Polished Brass 099,

or Satin 295)

Custom Accessories Available:

Pulse Jet Kit: PULSE-JET (two per kit, specify
White 020, Bone 021, or Linen 222)

Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)

E-Z-Install™ Whirlpool Heater - EZHEAT-100

Tile Bead Kit: TILE-BEAD

NOTE:  Roughing-in dimensions and product specifica-
tions shown on reverse side of page.

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage 

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density

* See American Standard Faucet Selector

NOTE:  E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.

Отзывы: