WSER
MOTOR GUIDE p
D50
1
ALPHA SUPPORT PHONE (909) 307-2320
DC12 V
0
Power
1
1
15-20
1.
CAL
TECHNI
SPECIFICATIONS
Power: Lithium battery DC12V
Received frequency: 433.92MHz
Protection Class: IP44
Way A
2. WIRE CONNECTION
3. CODE LEARNING
Note: After code learning, you can use the
to control the motor to run up, down and stop.
remote
Power on, the motor
will vibrate.
Note:
a) Way A is only for the tubular motor which didn't learn any
’s code.
remote
b) If the motor has already learned
’s code, Way A is invalid for this motor, but you can cut the electricity and then power on the
remote
motor three times continuously, and make sure the motor vibrate each time, then Way A is valid for this motor.
Power on learning
Channel Switch
Button
UP
STOP
DOWN
LIGHT
battery wand
capacity
battery discharging
battery
charging
charging voltage
solar panel
Press
’s UP and DOWN
remote
buttons simultaneously.
Press
’s STOP button
remote
once, the motor will vibrate.
1
Way B
Press the UP and DOWN
buttons of
A
remote
simultaneously.
Press the STOP button of
A eight times, the
remote
motor will vibrate.
Press the UP and DOWN
buttons of
B simultaneously.
remote
Press the STOP button of
B
remote
once, the motor will vibrate again.
Now
B can control the motor as well.
remote
A
A
B
B
1
1
1
1
Note:
A has learned motor's code, and
B is a new one.
Remote
remote
1
8
1
1
Code learning is successful,
you can control the motor by
the
.
remote
Way C
Press motor head's button for 1s
till the motor vibrates.
You can control the motor
by the
.
remote
Press
’s UP button
remote
once, the motor vibrates once.
Press
’s UP and DOWN
remote
buttons simultaneously.
Press
’s STOP
remote
button six times.
6
1
1
All the
that have already
remote
learned the motor's code won't
control the motor any more.
Note:
All the
will not control this motor, unless you cut off the power and do code learning again.
remotes
Way A
4. CODE DELETING
Press
’s UP and DOWN
remote
buttons simultaneously.
Press
’s STOP button
remote
once, the motor will vibrate.
1
1
1
Code: Rolling code
One motor can be controlled by 15 units of
at most
remotes
