Aladdin MAXbrite Burner Operating and Safety Instructions – November 2016 1 |
P a g e
Crownplace Brands, Ltd
291 N Kurzen Road, Dalton, OH 44618
800-457-5267 |
www.aladdinlamps.com
|
MAXbrite® Burner OPERATING AND SAFETY INSTRUCTIONS
Carefully read, understand and follow instructions before lighting your lamp!
DANGER: Failure to follow these instructions can result in burns/fire hazard.
IMPORTANT
Use only Aladdin® Fuel or K1 Kerosene.
Lamp may overheat and flare up if not adjusted properly.
Never leave a burning lamp unattended. Keep lamp out of reach of children and away from
pets.
Securely and properly assemble all components, using the instructions provided.
Use only in well-ventilated area.
Very high operating temperature. Keep combustible materials 36” away. Lamp parts may still
be hot enough to burn your skin after lamp is extinguished.
Do not return your purchase to your Aladdin Dealer without contacting them and us first. We are
happy to work with our Dealers to assist in correcting any problems. If you have any problems, please
call 800-457-5267, email
or visit
www.aladdinlamps.com
.
Aladdin® MAXbrite® burners are many times brighter than all other wick lamps, while using a fraction of the fuel. How
do they do it? By engineering the flow of oxygen, your Aladdin® MAXbrite® burner achieves extremely high efficiency and
complete, virtually odorless, combustion. The HOT blue flame incandesces the mantle cloth with brilliant white light.
To operate properly, the lamp requires the correct Aladdin® brand parts* that are not bent or damaged. An even blue
flame is essential. Your new burner is much easier to operate than other mantle-equipped lights. But, peak “Aladdin®
Magic” brilliance and safe performance depends on you.
Assembly
1.
Unwrap/Locate all the parts of your lamp including lamp base, burner, mantle and chimney. If any items have a
protective material, remove it before assembly. CAUTION: Glass items and mantle are very fragile.
2.
Test fit the chimney into the prongs on the top of the burner gallery. You may have to bend the prongs to achieve a
snug fit. For best results, use only Aladdin® MAXbrite®* chimney.
3.
Remove your Aladdin® R150 Lox-On Mantle from the box, touching only the wire frame. CAUTION: Never touch the
blue fabric part or allow box flaps to strike it, or fabric may break in use.
4.
Remove the burner gallery, by twisting counter-clockwise.
5.
While holding mantle’s wire frame near the base, gently fit mantle base against the center of the gallery. Turn right
(clockwise) until locked. Make sure all four tabs on the underside of the mantle base engage the slots on the gallery.
Burner Gallery
