![background image](http://html.mh-extra.com/html/abb/acs355-ul-4x/acs355-ul-4x_quick-start-manual_3284001.webp)
MODIFYING
THE
ACS355
UL
T
YPE
4X
FOR
M
XXX
OPTIONS
Description:
The following instructions are designed to provide a step by step procedure; how to modify the
ACS355 UL Type 4X drive for Mxxx-01 (MPOW-01, MREL-01 or MTAC-01) option. If these
procedures are followed and executed properly all standard product warranties apply.
1.1 Table of Contents
Using a dremel tool cut the power and fault indicator extension tab approximately a 3/16”
Modify Mxxx-01 (MPOW-01, MREL-01, MTAC-01) for UL Type 4X drive mounting. .................... 4
Using a screw driver release the four securing tabs and then remove the top cover. .............. 4
Remove the circuit board fastening screw from the drive and insert and tighten the Mxxx-01
Install the Mxxx-01 option onto the drive and secure using the screw provided with the Mxxx-
Option 1 – Built-In Control Panel – Disconnected
Note: Option 1 will require removing the
ACS355’s UL Type 4x front cover to connect the drives control panel.
............................................. 7
Option 2 – Blank Control Panel -
Note: Option 2 will require removing the control panel
Author: Jeff Fell – Application Eng., Greg Semrow – Product
Marketing
Date: 8, 2014
External
Industry – Industrial
Document #: LVD-EOTN72U-EN
Revision: A
Product Categories: ACS355, MPOW, MREL, MTAC