Singalong Kit Assembly
Thank you for purchasing the Singalong Kit to accompany the McRoboFace “emoticon”. This kit will
allow you to build the breadboard to work with Robin Newman’s project from
this link
Note that we have used different components from the project shown in the link above, but the
circuit is the same and easier to assemble.
Step 1 – Check you Have All Components
•
400-point Breadboard
•
1m Audio lead (white)
•
Audio splitter lead (black)
•
Strip of 10 dupont cables, 30cm
•
Red jumper wire
•
Black jumper wire
•
Audio cable to breadboard connector PCBA
•
12mm Tact switch
•
10K breadboard-friendly trim pot
•
10K resistor (Bands are Brown, Black, Orange)
•
2 x 47uF capacitors
Step 2 – Plug in the Audio Connector PCBA
