manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL IDP 10, User Manual, Page: 80 / 111

Share
Download
ZyXEL Communications ZyXEL ZyWALL IDP 10 User Manual Download Page 80

ZyWALL IDP 10 User’s Guide 

7-4 

 

                                            Log and Report 

Table 7-2 Report: E-Mail 

LABEL

 

DESCRIPTION

 

Apply 

Click this button to save your changes back to the ZyWALL. 

Reset 

Click this button to begin configuring this screen afresh. 

7.2.2 Syslog 

Syslog logging sends a log to an external syslog server used to store logs.  

 

Figure 7-3 Report: syslog 

The following table describes the fields in this screen. 

Table 7-3 Report: syslog 

LABEL DESCRIPTION 

Syslog Logging

 

 

Active

 

Click 

Active

 to enable syslog logging.

 

Syslog Server  

Enter the server name or IP address of the syslog server that will log the selected 
categories of logs. 

Log Facility 

 

Select a location from the drop down list box. The log facility allows you to log the 
messages to different files in the syslog server. Refer to the documentation of your 
syslog program for more details.

 

7.3 Alarm 

Schedule 

An alarm is a “warning log” generated by an event that warrants more serious attention. They include 
system errors and serious intrusions. 

Click 

ALARM 

under the 

LOG & REPORT 

heading in the MAIN MENU of the Web Configurator. 

Summary of Contents for ZyXEL ZyWALL IDP 10
















































































































Reviews:

No comments