ZyXEL Communications ZyXEL ZyWALL IDP 10, User Manual, Page: 40 / 111

ZyWALL IDP 10 User’s Guide
5-4 Remote Management
Figure 5-3 Remote Management: SNMP
The following table describes the fields in this screen.
Table 5-3 Remote Management: SNMP
LABEL DESCRIPTION
SNMP Configuration
Get Community This is the “password” for the incoming Get and GetNext requests from the management
station.
Set Community This is the “password” for incoming Set requests from the management station.
Trap Community Type the trap community, which is the password sent with each trap to the SNMP
manager.
Destination Type the IP address of the station to which SNMP traps are sent.
Server Access Select the interface(s) through which a computer may access the ZyWALL using this
service. Define the rule for server access by selecting from the drop-down menu.
Options are
LAN + MGMT , WAN + MGMT , MGMT , ALL and Disable .
Secure Client IP
Address A secure client is a “trusted” computer that is allowed to communicate with the ZyWALL
using this service. Select
All to allow any computer to access the ZyWALL using this
service. Choose Selected to just allow the computer with the IP address that you specify
to access the ZyWALL using this service.
Apply Click this button to save your changes back to the ZyWALL.
Reset Click this button to begin configuring this screen afresh.
5.4 SSH Overview
Unlike Telnet or FTP, which transmit data in clear text, SSH (Secure Shell) is a secure communication
protocol that combines authentication and data encryption to provide secure encrypted communication
between two hosts over an unsecured network.