manualshive.com logo in svg

ZyXEL Communications ZyXEL ZyWALL IDP 10, User Manual, Page: 33 / 111

Share
Download
ZyXEL Communications ZyXEL ZyWALL IDP 10 User Manual Download Page 33

ZyWALL IDP 10 User’s Guide

Interface Screens 

4-1 

Chapter 4 

Interface Screens 

This chapter shows you how to configure the ZyWALL ports. 

4.1 10/100M 

Auto-Sensing 

Ethernet 

Ports 

The ZyWALL supports 10/100Mbps auto-negotiating Ethernet. There are two factors related to the 
connection of two Ethernet ports: speed and duplex mode. In a 10/100Mbps fast Ethernet, the speed 
can be 10Mbps or 100Mbps and the duplex mode can be half duplex or full duplex. The auto-
negotiation capability makes one Ethernet port able to negotiate with a peer automatically to obtain the 
optimal connection speed and duplex mode. 

When auto-negotiation is turned on, the Ethernet port of the ZyWALL negotiates with the peer 
Ethernet port on the Ethernet cable automatically to determine the optimal connection speed and 
duplex mode. If the peer Ethernet port does not support auto-negotiation or turns off this feature, the 
ZyWALL determines the connection speed by detecting the signal on the cable and using half duplex 
mode. When the ZyWALL’s auto-negotiation is turned off, the Ethernet port uses the pre-configured 
speed and duplex mode settings when making a connection, thus requiring you to check the settings of 
the peer Ethernet port in order to connect.

 

4.2 Configuring 

Link 

To change your ZyWALL’s link settings, click 

INTERFACE

, then the 

Link 

tab. 

 

Figure 4-1 Interface: Link 

The following table describes the fields in this screen. 

Summary of Contents for ZyXEL ZyWALL IDP 10
















































































































Reviews:

No comments