ExpWave 240B Secure Outdoor Ethernet Radio Link
General Setup
4-1
Chapter 4 Menu 1 - General Setup
Menu 1 - General Setup
contains administrative and system-related information.
4.1 System
Name
System Name
is for identification purposes. ZyXEL recommends you enter your computer’s “Computer name”.
•
In Windows 95/98 click
Start
->
Settings
->
Control Panel
and then double-click
Network
. Click the
Identification
tab, note the entry for the
Computer
name
field and enter it in the ExpWave
System Name
field.
•
In Windows 2000 click
Start
->
Settings
->
Control Panel
and then double-click
System
. Click the
Network
Identification
tab and then the
Properties
button. Note the entry for the
Computer name
field and enter it in
the ExpWave
System Name
field.
•
In Windows XP, click
start
->
My Computer
->
View system information
and then click the
Computer
Name
tab. Note the entry in the
Full computer name
field and enter it as the ExpWave
System
Name
.
The
Domain Name
entry is what is propagated to the DHCP clients on the LAN. If you leave this field blank, the
domain name obtained by DHCP from the ISP is used. While you must enter the host name (
System Name
) on each
individual machine, the domain name can be assigned from the ExpWave via DHCP.
4.2 General
Setup
Step 1.
Enter 1 in the main menu to open
Menu 1 — General Setup
.
Step 2.
The
Menu 1 - General Setup
screen appears, as shown next. Fill in the required fields.
Figure 4-1 Menu 1 — General Setup
Table 4-1 General Setup Menu Field
FIELD
DESCRIPTION
EXAMPLE
System Name Choose a descriptive name for identification purposes. It is
recommended you enter your computer’s “Computer name” (
see
section 0)
in this field. This name can be up to 30 alphanumeric
characters long. Spaces are not allowed, but dashes “-” and
underscores "_" are accepted.
240B-AP
Domain Name Enter the domain name (if you know it) here. If you leave this field
blank, the ISP may assign a domain name via DHCP. You can go to
menu 24.8 and type "sys domain name" to see the current domain
name used by your router.
If you want to clear this field just press [SPACE BAR] and then
[ENTER]. The domain name entered by you is given priority over the
ISP assigned domain name.
ap-n.lab.ZyXEL.com
.tw
IP Routing
Press [SPACE BAR] and then [ENTER] to select
Router
or
Bridge
.
Select Bridge to set AP and AC work as bridge ,Router to set AP and
AC work as bridge
Menu 1 - General Setup
System Name= 240B-AP
Domain Name= ap-n.lab.ZyXEL.com.tw
IP Routing = Router Mode
Press ENTER to Confirm or ESC to Cancel: