ZyXEL Communications ZyWALL 10, User Manual

Page: 36 / 254

ZyWALL 10 Internet Security Gateway
2-2 Hardware Installation & Initial Setup
LEDs Function Indicator
Status
Active Description
Off The WAN Link is not ready, or has failed.
On The WAN Link is ok.
WAN WAN Green
Flashing The 10M WAN link is sending/receiving packets.
2.2 ZyWALL 10 Rear Panel and Connections
The following figure shows the rear panel of your ZyWALL 10 and the connection diagram.
Figure 2-2 ZyWALL 10 Rear Panel and Connections
This section outlines how to connect your ZyWALL 10 to the LAN and the WAN. In the case of
connecting a Cable Modem you must connect the coaxial cable from your cable service to the threaded
coaxial cable connector on the back of the cable modem. Connect an xDSL Modem to the xDSL Wall Jack.
Please also
see Appendix C for important safety instructions on making connections to the ZyWALL.