ZyXEL Communications XGS1210-12 User Manual Download Page 51

Page: 51 / 82

Chapter 11 Mirroring

XGS1210-12 / XGS1250-12 User’s Guide

Figure 37

Mirroring

The following table describes the labels in this screen.

Table 14 Mirroring

LABEL

DESCRIPTION

Port Mirroring

Select

Enable

to activate port mirroring on the Switch, or

Disable

to disable the feature.

Mirror Direction

Specify the direction of the traffic to mirror by selecting from the drop-down list box. Choices
are

Egress

(outgoing),

Ingress

(incoming) and

Both

Port

This displays the port number.

Monitor Port

The monitor port is the port you copy the traffic to in order to examine it in more detail without
interfering with the traffic flow on the original ports.

Note: Select one monitor port.

Mirrored Port

Select this option to mirror the traffic on a port.

Note: Select one or multiple mirrored ports.

Apply

Click this button to save your changes to the Switch.

Summary of Contents for XGS1210-12



















































































Search results

Summary of Contents for XGS1210-12

Reviews:

Related manuals for XGS1210-12

Brands by name

Popular brands

ZyXEL Communications XGS1210-12, User Manual

Search results

Summary of Contents for XGS1210-12

Reviews:

Related manuals for XGS1210-12

Brands by name

Popular brands