ZyXEL Communications WRE6606 User Manual Download Page 137

Page: 137 / 144

Appendix C Legal Information

WRE6606 User’s Guide

137

• Les liaisons sans fil pour une utilisation en extérieur d’une distance supérieure à 300 mètres doivent être notifiées à l’Institut Belge des

services Postaux et des Télécommunications (IBPT). Visitez http://www.ibpt.be pour de plus amples détails.

Denmark
• In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.

• I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs.
Italy
• This product meets the National Radio Interface and the requirements specified in the National Frequency Allocation Table for Italy.

Unless this wireless LAN product is operating within the boundaries of the owner's property, its use requires a “general authorization.”

Please check http://www.sviluppoeconomico.gov.it/ for more details.

• Questo prodotto è conforme alla specifiche di Interfaccia Radio Nazionali e rispetta il Piano Nazionale di ripartizione delle frequenze in

Italia. Se non viene installato all 'interno del proprio fondo, l'utilizzo di prodotti Wireless LAN richiede una “Autorizzazione Generale”.

Consultare http://www.sviluppoeconomico.gov.it/ per maggiori dettagli.

Latvia
• The outdoor usage of the 2.4 GHz band requires an authorization from the Electronic Communications Office. Please check http://

www.esd.lv for more details.

• 2.4 GHz frekvenèu joslas izmantoðanai ârpus telpâm nepiecieðama atïauja no Elektronisko sakaru direkcijas. Vairâk informâcijas:

http://www.esd.lv.

Notes:
1. Although Norway, Switzerland and Liechtenstein are not EU member states, the EU Directive 1999/5/EC has also been implemented in

those countries.
2. The regulatory limits for maximum output power are specified in EIRP. The EIRP level (in dBm) of a device can be calculated by adding

the gain of the antenna used(specified in dBi) to the output power available at the connector (specified in dBm).

List of national codes

Safety Warnings

• Do not use this product near water, for example, in a wet basement or near a swimming pool.

• Do not expose your device to dampness, dust or corrosive liquids.

• Do not store things on the device.

• Do not obstruct the device ventilation slots as insufficient airflow may harm your device. For example, do not place the device in an

enclosed space such as a box or on a very soft surface such as a bed or sofa.

• Do not install, use, or service this device during a thunderstorm. There is a remote risk of electric shock from lightning.

• Connect ONLY suitable accessories to the device.

• Do not open the device or unit. Opening or removing covers can expose you to dangerous high voltage points or other risks. ONLY

qualified service personnel should service or disassemble this device. Please contact your vendor for further information.

• Make sure to connect the cables to the correct ports.

• Place connecting cables carefully so that no one will step on them or stumble over them.

• Always disconnect all cables from this device before servicing or disassembling.

• Do not remove the plug and connect it to a power outlet by itself; always attach the plug to the power adaptor first before connecting

it to a power outlet.

• Do not allow anything to rest on the power adaptor or cord and do NOT place the product where anyone can walk on the power adaptor

or cord.

• Please use the provided or designated connection cables/power cables/ adaptors. Connect it to the right supply voltage (for example,

110V AC in North America or 230V AC in Europe). If the power adaptor or cord is damaged, it might cause electrocution. Remove it

from the device and the power source, repairing the power adapter or cord is prohibited. Contact your local vendor to order a new one.

• Do not use the device outside, and make sure all the connections are indoors. There is a remote risk of electric shock from lightning.

COUNTRY

ISO 3166 2 LETTER CODE

COUNTRY

ISO 3166 2 LETTER CODE

Austria

Liechtenstein

Belgium

Lithuania

Bulgaria

Luxembourg

Croatia

Malta

Cyprus

Netherlands

Czech Republic

Norway

Denmark

Poland

Estonia

Portugal

Finland

Romania

France

Serbia

Germany

Slovakia

Greece

Slovenia

Hungary

Spain

Iceland

Switzerland

Ireland

Sweden

Italy

Turkey

Latvia

United Kingdom

Summary of Contents for WRE6606

















































































































































Search results

Summary of Contents for WRE6606

Reviews:

Related manuals for WRE6606

Brands by name

Popular brands

ZyXEL Communications WRE6606, User Manual

Search results

Summary of Contents for WRE6606

Reviews:

Related manuals for WRE6606

Brands by name

Popular brands