Chapter 3 Connection Wizard
WRE2206 User’s Guide
16
The following table describes the labels in this screen.
Note: The wireless stations and WRE2206 must use the same SSID, channel ID, WPA-PSK
(if WPA-PSK is enabled) or WPA2-PSK (if WPA2-PSK is enabled) for wireless
communication.
2
Type a key. The number of characters accepted by the KEY field is shown in the following table.
Table 3
Network > Wireless LAN > AP Select
LABEL
DESCRIPTION
Select
Use the radio button to select the wireless device to which you want to connect.
SSID
This displays the Service Set IDentity of the wireless device. The SSID is a unique name
that identifies a wireless network. All devices in a wireless network must use the same
SSID.
MAC
This displays the MAC address of the wireless device.
Channel
This displays the channel number used by this wireless device.
Mode
This displays which IEEE 802.11b/g/n wireless networking standards the wireless device
supports.
Security Mode
This displays the type of security configured on the wireless device. When
no
is shown, no
security is configured and you can connect to it without a password.
Strength
This displays the strength of the wireless signal. The signal strength mainly depends on
the antenna output power and the distance between your WRE2206 and this device.
Setup repeater
manually
Select this to setup the AP manually.
SSID
If
Setup repeater manually
is selected, use this field to type the SSID of the AP. This is
useful when the AP’s SSID is hidden.
Refresh
Click this to search for available wireless devices within transmission range and update
this table.
BACK
Click this to go back to the previous step in the wizard.
NEXT
Click this to start the next step in the AP setup process.
EXIT
Click this to exit the wizard.
Previous
Click this to see the previous page of APs.
Next
Click this to see the next page of APs.
Table 4
Maximum Key Lengths
ENCRYPTION
KEY FORMAT
KEY LENGTH
64-bit WEP
ASCII
5 characters
Hex
10 characters
128-bit WEP
ASCII
13 characters
Hex
26 characters
WPA pre-shared key
Passphrase
8-63 characters
Hex
64 characters