ZyXEL Communications WRE 2205, User Manual, Page: 48 / 74

Chapter 6 Wireless LAN
WRE2205 User’s Guide
48
Figure 34
Network > Wireless LAN > WPS Station
The following table describes the labels in this screen.
6.10 AP Select Screen
Use this screen to choose an access point that you want the WRE2205 to connect to. You should
know the security settings of the target AP.
To open this screen, click Network > Wireless LAN > AP Select tab.
Figure 35
Network > Wireless LAN > AP Select
Table 18
Network > Wireless LAN > WPS Station
LABEL DESCRIPTION
Config Mode Use this to select Registrar or Enrollee mode. Select Registrar mode to make wireless
clients follow the wireless settings of the WRE2205. Select Enrollee mode to make the
WRE2205 follow the wireless settings of an access point.
Push Button Use this button when you use the PBC (Push Button Configuration) method to configure
wireless stations’s wireless settings. See
Section 5.2.1 on page 29 .
Click this to start WPS-aware wireless station scanning and the wireless security
information synchronization.
Input station’s
PIN number Use this button when you use the PIN Configuration method to configure wireless station’s
wireless settings. See
Section 5.2.2 on page 31 .
Type the same PIN number generated in the wireless station’s utility. Then click Start to
associate to each other and perform the wireless security information synchronization.