Chapter 8 Tutorials
WAP6804 User’s Guide
47
•
Selecting an AP by Manually Entering Security Information
- create a secure wireless network by
manually entering the AP’s wireless security settings in the WAP6804’s interface. See
. This is useful when the AP is hidden.
8.4.1 Selecting an AP from an Automatically Detected List
This section demonstrates the procedures in Repeater mode. Follow the steps below to create a secure
wireless network by selecting an AP from a list of detected APs.
The AP select function is available both in Client mode and Repeater mode.
The instructions require that your hardware is connected (see the Quick Start Guide) and you are
logged into the Web Configurator through your LAN connection (see
).
1
Open the
Networking
>
AP Connection
>
AP List
screen. Select an AP form the
SSID
column. Type the
WiFi key if wireless security is enabled on the selected AP and click
Connect
.
Check the connection status to see if your WAP6804 is successfully connected to the AP.
8.4.2 Selecting an AP by Manually Entering Security Information
This example shows you how to configure wireless security settings with the following parameters on your
WAP6804.
SSID
Zyxel
Security
WPA(2)-PSK
WiFi Key
1234567890
