WAP5805 User’s Guide
20
C
H A P T E R
3
The Web Configurator
3.1 Overview
This chapter describes how to access the WAP5805 Web Configurator and provides an overview of
its screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the WAP5805 via Internet browser. Use Internet Explorer 6.0 and later or Firefox
2.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter (
) to see how to make sure these
functions are allowed in Internet Explorer.
3.2 Accessing the Web Configurator
1
Connect your computer to the LAN port of the WAP5805.
2
The default IP address of the WAP5805 in access point mode is “192.168.1.2”. In this case, your
computer must have an IP address in the range between “192.168.1.3” and “192.168.1.254”. The
default IP address of the WAP5805 in client mode is “192.168.1.10”. In this case, your computer
must have an IP address in the range between “192.168.1.3” and “192.168.1.254” except for
“192.168.1.10”.
3
Click
Start > Run
on your computer in Windows. Type “cmd” in the dialog box. Enter “ipconfig” to
show your computer’s IP address. If your computer’s IP address is not in the correct range then see
for information on changing your computer’s IP address.
4
After you’ve set your computer’s IP address, open a web browser such as Internet Explorer and
type “http://192.168.1.2” for AP and “http://192.168.1.10” for CL as the web address in your web
browser.
Summary of Contents for WAP5805
Page 8: ...8 PART I User s Guide...
Page 9: ...9...
Page 30: ...30 PART II Technical Reference Expert Mode...
Page 31: ...31...
