manualshive.com logo in svg

ZyXEL Communications wap3205 V3, User Manual

Share
Download
ZyXEL Communications wap3205 V3 User Manual Download Page 83

WAP3205 v3 User’s Guide

83

C

HAPTER

 13

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The potential problems are 
divided into the following categories. 

•

Power, Hardware Connections, and LEDs

•

WAP3205 v3 Access and Login

•

Internet Access

•

Resetting the WAP3205 v3 to Its Factory Defaults

•

Wireless Problems

13.1  Power, Hardware Connections, and LEDs

The WAP3205 v3 does not turn on. None of the LEDs turn on.

1

Make sure you are using the power adaptor or cord included with the WAP3205 v3.

2

Make sure the power adaptor or cord is connected to the WAP3205 v3 and plugged in to an 
appropriate power source. Make sure the power source is turned on.

3

Disconnect and re-connect the power adaptor or cord to the WAP3205 v3.

4

If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

1

Make sure you understand the normal behavior of the LED. See 

Section 1.3 on page 11

.

2

Check the hardware connections. See the Quick Start Guide. 

3

Inspect your cables for damage. Contact the vendor to replace any damaged cables.

4

Disconnect and re-connect the power adaptor to the WAP3205 v3. 

5

If the problem continues, contact the vendor.

Summary of Contents for wap3205 V3






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands