manualshive.com logo in svg

ZyXEL Communications wap3205 V3, User Manual

Share
Download
ZyXEL Communications wap3205 V3 User Manual Download Page 69

Chapter 7 LAN

WAP3205 v3 User’s Guide

69

The WAP3205 v3 can get the DNS server addresses in the following ways.

1

The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you sign up. 
If your ISP gives you DNS server addresses, enter them in the 

DNS Server

 fields in the 

Wizard 

and/or 

WAN

 

> Internet Connection

 screen.

2

If the ISP did not give you DNS server information, leave the 

DNS Server

 fields set to 

0.0.0.0 

in the 

Wizard 

screen and/or set to 

From ISP

 in the

 WAN

 

> Internet Connection

 screen for the ISP to dynamically assign 

the DNS server IP addresses.

7.2.3  IP Pool Setup

The WAP3205 v3 is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to 
192.168.1.64. This configuration leaves 31 IP addresses (excluding the WAP3205 v3 itself) in the lower 
range (192.168.1.2 to 192.168.1.32) for other server computers, for instance, servers for mail, FTP, TFTP, 
web, etc., that you may have.

7.2.4  LAN TCP/IP 

The WAP3205 v3 has built-in DHCP server capability that assigns IP addresses and DNS servers to systems 
that support DHCP client capability.

7.3  LAN IP Screen

Use this screen to change your basic LAN settings. Click 

Network

 > 

LAN

.

Figure 50   

Network > LAN > IP 

The following table describes the labels in this screen.

Table 30   Network > LAN > IP

LABEL

DESCRIPTION

IP Address

Type the IP address of your WAP3205 v3 in dotted decimal notation 192.168.1.1 (factory 
default).

IP Subnet Mask

The subnet mask specifies the network number portion of an IP address. Your WAP3205 v3 
will automatically calculate the subnet mask based on the IP address that you assign. Unless 
you are implementing subnetting, use the subnet mask computed by the WAP3205 v3.

Apply

Click 

Apply

 to save your changes back to the WAP3205 v3.

Reset

Click 

Reset

 to begin configuring this screen afresh.

Summary of Contents for wap3205 V3






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands