manualshive.com logo in svg

ZyXEL Communications wap3205 V3, User Manual

Share
Download
ZyXEL Communications wap3205 V3 User Manual Download Page 42

 Chapter 4 Modes

WAP3205 v3 User’s Guide

42

The following table describes the labels shown in the 

Status

 screen.

4.4.2  Universal Repeater Navigation Panel

Use the menu in the navigation panel to configure WAP3205 v3 features in 

Client Bridge Mode

.

The following screen and table show the features you can configure in 

Client Bridge Mode

.

Table 16   Status Screen (Client Bridge Mode)

LABEL

DESCRIPTION

Device Information

System Name

This is the 

System Name

 you enter in the 

Maintenance

 > 

System

 >

 General

 screen. 

It is for identification purposes.

Firmware Version

This is the current firmware version of the WAP3205 v3. 

LAN Information

- MAC Address

This shows the LAN Ethernet adapter MAC Address of your device.

- IP Address

This shows the LAN port’s IP address.

- IP Subnet Mask

This shows the LAN port’s subnet mask.

- DHCP Server

This shows the status of the LAN port’s DHCP server.

WLAN STA Information

- SSID

This is the name of the selected AP that the WAP3205 v3 is associating with. 

- Security Mode

This shows the wireless security the WAP3205 v3 is using to connect to the AP.

- Connection Status

This shows whether the WAP3205 v3 is currently associated with the selected AP.

System Status

Operation Mode

This field shows the device operating mode: 

Access Point

, 

Universal Repeater

 or 

Client Bridge

.

System Up Time

This is the total time the WAP3205 v3 has been on.

Current Date/Time

This field displays your WAP3205 v3’s present

 

date and time.

Interface Status

Interface

This displays the WAP3205 v3 port types. 

Status

For the LAN ports, this field displays 

Down 

(line is down) or 

Up 

(line is up or 

connected).

For the WLAN, it displays 

Up 

when the WLAN is enabled or 

Down 

when the WLAN is 

disabled.

Rate

For the LAN ports, this displays the port speed or 

N/A 

when the line is 

disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN is 
enabled and 

N/A 

when the WLAN is disabled.

Summary

Client Table

Use this screen to view information of the client that is currently connected to the 
WAP3205 v3’s Ethernet LAN port.

Packet Statistics

Use this screen to view port status and packet specific statistics.

Summary of Contents for wap3205 V3






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands