manualshive.com logo in svg

ZyXEL Communications wap3205 V3, User Manual

Share
Download
ZyXEL Communications wap3205 V3 User Manual Download Page 38

 Chapter 4 Modes

WAP3205 v3 User’s Guide

38

The following table describes the labels shown in the 

Status

 screen.

Table 14   Status Screen (Universal Repeater Mode)

LABEL

DESCRIPTION

Device Information

System Name

This is the 

System Name

 you enter in the 

Maintenance

 > 

System

 >

 General

 screen. 

It is for identification purposes.

Firmware Version

This is the current firmware version of the WAP3205 v3. 

LAN Information

- MAC Address

This shows the LAN Ethernet adapter MAC Address of your device.

- IP Address

This shows the LAN port’s IP address.

- IP Subnet Mask

This shows the LAN port’s subnet mask.

- DHCP Server

This shows the LAN port’s DHCP server.

WLAN AP Information

- MAC Address

This shows the wireless adapter MAC Address of your device.

- Status

This shows the current status of the Wireless LAN - 

Enabled 

or 

Disabled

.

- Name (SSID)

This shows a descriptive SSID name used to identify the WAP3205 v3 in the wireless 
LAN. 

- Channel

This shows the channel number which you select manually or 

Auto

 when the 

WAP3205 v3 automatically scans and selects the Wireless LAN’s channel.

- Operating Channel

This shows the current channel number the WAP3205 v3 uses over the Wireless LAN. 

- Security Mode

This shows the data encryption method the WAP3205 v3 uses for the wireless 
connection.

- 802.11 Mode

This shows the IEEE 802.11 standard that the WAP3205 v3 supports. Wireless clients 
must support the same standard in order to be able to connect to the WAP3205 
v3.

- WPS

This displays 

Configured 

when the WPS has been set up.

This displays 

Unconfigured 

if the WPS has not been set up.

WLAN STA Information

- SSID

This is the name of the selected AP that the WAP3205 v3 is associating with. 

- Security Mode

This shows the wireless security the WAP3205 v3 is using to connect to the wireless 
device.

- Connection Status

This shows whether the WAP3205 v3 is currently associated with the selected AP.

System Status

Operation Mode

This field shows the device operating mode: 

Access Point

, 

Universal Repeater

 or 

Client Bridge

.

System Up Time

This is the total time the WAP3205 v3 has been on.

Current Date/Time

This field displays your WAP3205 v3’s present

 

date and time.

Interface Status

Interface

This displays the WAP3205 v3 port types. 

Status

For the LAN ports, this field displays 

Down 

(line is down) or 

Up 

(line is up or 

connected).

For the WLAN, it displays 

Up 

when the WLAN is enabled or 

Down 

when the WLAN is 

disabled.

Summary of Contents for wap3205 V3






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands