VSG-1200 User’s Guide
Chapter 4 LAN, WAN and Server Setup
61
The following table describes the related fields in this screen.
4.8 Server Configuration
Use the
Server Configuration
screen to set the embedded web server, the LAN DHCP server
and specify the e-mail server for e-mail redirection on the VSG.
Click
System Setting
and
Server
to display the screen as shown next.
Table 9
System Setting: WAN/LAN: PPTP
FIELD
DESCRIPTION
WAN Port Mode
PPTP
Select this option to activate
PPTP
support. Refer to
PPTP Local IP Address Enter the IP address assigned to you.
PPTP Local Subnet
Mask
Enter the subnet mask assigned to you.
PPTP Local Default
Gateway
Enter the IP address of the gateway device.
Username
Enter the user name exactly as your ISP assigned. If assigned a name in the
form user@domain where domain identifies a service name, then enter both
components exactly as given.
Password
Enter the password associated with the user name above.
PPP MTU Setting
Enter the size of a Maximum Transmission Unit (MTU).
TCP MSS Setting
Enter the size of the Maximum Segment Size (MSS).
Connections ID/Name
Enter your identification name of the PPTP server assigned to you by the ISP.
Connect on Demand
Select this option when you don’t want the connection up all the time and
specify an idle timeout in the
Max Idle Time
field (maximum 65535 minutes).
This is the default setting with an idle timeout of
10
minutes.
Keep Alive
Select this option when you want the Internet connection up all the time and
specify a redial period in the
Redial Period
field (maximum 65535 seconds).
When disconnected, the VSG will attempt to bring up the connection after the
redial period.
Summary of Contents for VSG-1200
