ZyXEL Communications VDSL SWITCH VES-1616F-3X, User Manual

Page: 263 / 310

Chapter 34 IEEE 802.1Q Tagged VLAN Commands
VES-1616F-3x Series User’s Guide
263
Syntax:
vlan <vlan-id>
fixed <port-list>
forbidden <port-list>
name <name-str>
normal <port-list>
untagged <port-list>
no fixed <port-list>
no forbidden <port-list>
no untagged <port-list>
where
• Enter
fixed
to register the
<port-list>
to the static VLAN table with
<vlan-id>
.
• Enter
normal
to confirm registration of the
<port-list>
to the static VLAN table with
<vlan-id>
.
• Enter
forbidden
to block a
<port-list>
from joining the static VLAN table with
<vlan-id>
.
• Enter
no fixed
or
no forbidden
to change
<port-list>
to normal status.
• Enter
untagged
to send outgoing frames without a tag.
• Enter
no untagged
to tag outgoing frames.
The following example configures ports 1 to 5 as fixed and untagged ports in VLAN 2000.
34.3.5 Forwarding Process Example
34.3.5.1 Tagged Frames
1
First the switch checks the VLAN ID (VID) of tagged frames or assigns temporary VIDs
to untagged frames.
2
The switch then checks the VID in a frame’s tag against the SVLAN table.
3 The switch notes what the SVLAN table says (that is, the SVLAN tells the switch
whether or not to forward a frame and if the forwarded frames should have tags).
4 Then the switch applies the port filter to finish the forwarding decision. This means that
frames may be dropped even if the SVLAN says to forward them. Frames might also be
dropped if they are sent to a CPE (customer premises equipment) DSL device that does
not accept tagged frames.
34.3.5.2 Untagged Frames
1 An untagged frame comes in from the LAN.
2 The switch checks the PVID table and assigns a temporary VID of 1.
<vlan-id> =
The VLAN ID [1 – 4094].
<name-str> =
A name to identify the SVLAN entry.
<port-list> =
This is the switch port list.
sysname(config)# vlan 2000
sysname(config-vlan)# fixed 1-5
sysname(config-vlan)# untagged 1-5