ZyXEL Communications Unified Security Gateway ZyWALL 300, User Manual

Page: 734 / 1156

Chapter 40 User/Group
ZyWALL USG 300 User’s Guide
734
40.4.1 Default User Authentication Timeout Settings Edit
Screens
The
Default Authentication Timeout Settings Edit
screen allows you to set the
default authentication timeout settings for the selected type of user account.
These default authentication timeout settings also control the settings for any
existing user accounts that are set to use the default settings. You can still
manually configure any user account’s authentication timeout settings.
Limit the number of
simultaneous logons
for administration
account
Select this check box if you want to set a limit on the number
of simultaneous logins by admin users. If you do not select
this, admin users can login as many times as they want at the
same time using the same or different IP addresses.
Maximum number per
administration
account
This field is effective when
Limit ... for administration
account is checked. Type the maximum number of
simultaneous logins by each admin user.
Limit the number of
simultaneous logons
for access account
Select this check box if you want to set a limit on the number
of simultaneous logins by non-admin users. If you do not
select this, access users can login as many times as they want
as long as they use different IP addresses.
Maximum number per
access account
This field is effective when Limit ... for access account is
checked. Type the maximum number of simultaneous logins by
each access user.
User Lockout Settings
Enable logon retry
limit
Select this check box to set a limit on the number of times
each user can login unsuccessfully (for example, wrong
password) before the IP address is locked out for a specified
amount of time.
Maximum retry count This field is effective when
Enable logon retry limit
is
checked. Type the maximum number of times each user can
login unsuccessfully before the IP address is locked out for the
specified lockout period . The number must be between 1 and
99.
Lockout period This field is effective when
Enable logon retry limit
is
checked. Type the number of minutes the user must wait to try
to login again, if
logon retry limit
is enabled and the
maximum retry count is reached. This number must be
between 1 and 65,535 (about 45.5 days).
Apply Click
Apply
to save the changes.
Reset Click
Reset
to return the screen to its last-saved settings.
Table 199 Configuration > Object > User/Group > Setting (continued)
LABEL DESCRIPTION