ZyXEL Communications Unified Security Gateway ZyWALL 300, User Manual

Page: 693 / 1156

Chapter 38 Anti-Spam
ZyWALL USG 300 User’s Guide
693
38.5 The Anti-Spam White List Screen
Click
Configuration > Anti-X
>
Anti-Spam > Black/White List
and then the
White List
tab to display the
Anti-Spam White List
screen.
Configure the white list to identify legitimate e-mail. You can create white list
entries based on the sender’s or relay’s IP address or e-mail address. You can also
create entries that check for particular header fields and values or specific subject
text.
Figure 470 Configuration > Anti-X > Anti-Spam > Black/White List > White List
The following table describes the labels in this screen.
Table 187 Configuration > Anti-X > Anti-Spam > Black/White List > White List
LABEL DESCRIPTION
General Settings
Enable White List
Checking
Select this check box to have the ZyWALL forward e-mail that
matches (an active) white list entry without doing any more anti-
spam checking on that individual e-mail.
Rule Summary
Add
Click this to create a new entry. See Section 38.4.1 on page 691 for
details.
Edit Select an entry and click this to be able to modify it. See Section
38.4.1 on page 691 for details.
Remove Select an entry and click this to delete it.
Activate To turn on an entry, select it and click
Activate
.
Inactivate To turn off an entry, select it and click
Inactivate
.
Status The activate (light bulb) icon is lit when the entry is active and
dimmed when the entry is inactive.
# This is the entry’s index number in the list.