manualshive.com logo in svg

ZyXEL Communications Unified Security Gateway ZyWALL 300, User Manual

The ZyXEL Communications Unified Security Gateway ZyWALL 300 is a powerful network security solution designed to protect your business from online threats. With comprehensive features and advanced functionalities, this device ensures reliable protection for your network. You can easily access the detailed Brochure & Specs, along with the user manual, for free download from manualshive.com.

Share
Download
background image

Appendix A Log Descriptions

ZyWALL USG 300 User’s Guide

1004

"Unable to negotiate 

with the device in %s. 

Please try to remove 

then insert the 

device.

The ZyWALL could not negotiate with the cellular device 

installed in (or connected to) the listed slot (%s). Remove 

and reinstall the device.

"Unable to configure 

the selected frequency 

band to the device in 

%s. Please try to 

remove then insert the 

device.

The ZyWALL failed to set the cellular device installed in (or 

connected to) the listed slot (%s) to use the frequency band 

you configured. The cellular device may not support the band 

or you may need to try removing and reinstalling the device.

"PIN code is required 

for inteface 

cellular%d. Please 

check the PIN code 

setting.

The PIN code configured for the listed cellular interface (%d) 

is incorrect or missing.

"SIM card has been 

successfully unlocked 

by PUK code on 

interface cellular%d.

You entered the correct PUK code and unlocked the SIM card 

for the cellular device associated with the listed cellular 

interface (%d).

"Incorrect PUK code of 

interface cellular%d. 

Please check the PUK 

code setting.

You entered an incorrect PUK code so you were not able to 

unlock the SIM card for the cellular device associated with the 

listed cellular interface (%d).

"SIM card of interface 

cellular%d in %s is 

damaged or not 

inserted. Please 

remove the device, 

then check the SIM 

card.

The SIM card for the cellular device associated with the listed 

cellular interface (%d) cannot be detected. The SIM card may 

be missing, not inserted properly, or damaged. Remove the 

device and check its SIM card. If it does not appear to be 

damaged, try re-inserting the SIM card.

"SIM card of interface 

cellular%d in %s is 

locked. Please enter 

PUK code to unlock.

The SIM card for the cellular device associated with the listed 

cellular interface (%d) is locked. This may be because the PIN 

code was entered incorrectly more than three times. You need 

to enter the PUK code to unlock the SIM card. .

"Incorrect PIN code of 

interface cellular%d. 

Please check the PIN 

code setting.

The listed cellular interface (%d) does has the wrong PIN 

code configured.

"Unable to query the 

signal quality from 

the device in %s. 

Please try to remove 

then insert the 

device.

The ZyWALL could not check the signal strength for the listed 

cellular interface (%d). This could be due to an error or being 

out of range of the ISP’s cellular station.

"Interface cellular%d 

cannot connect to the 

service provider.

The listed cellular interface (%d) cannot connect to the ISP. 

This could be due to an error or being out of range of the 

ISP’s cellular station.

"Interface cellular%d 

is configured with 

incorrect APN.

The listed cellular interface (%d) does not have the correct 

APN (Access Point Name) configured.

Table 303   

Interface Logs (continued)

LOG MESSAGE

DESCRIPTION

Summary of Contents for Unified Security Gateway ZyWALL 300





































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for Unified Security Gateway ZyWALL 300

PaloAlto Networks PA-410 Quick Start Manual preview
PA-410
Brand: PaloAlto Networks Pages: 2
Global Technology Associates GB-1200 Product Manual preview
GB-1200
Brand: Global Technology Associates Pages: 28
Arista DCA-NDR-A5 Quick Start Manual preview
DCA-NDR-A5
Brand: Arista Pages: 34
Fortinet FortiWiFi FortiWiFi-50B Install Manual preview
FortiWiFi FortiWiFi-50B
Brand: Fortinet Pages: 68
SecureLogix ETM System Installation Manual preview
ETM System
Brand: SecureLogix Pages: 212
Norman Network Protection Quick Setup Manual preview
Network Protection
Brand: Norman Pages: 2
Fortinet FortiSandbox 1000F Quick Start Manual preview
FortiSandbox 1000F
Brand: Fortinet Pages: 13

Brands by name

Popular brands

Load more brands