6
6
Note: The magnet and SHD1111 should be less than 10mm apart to respond to
each other properly.
Recommended Mounting Location
The SHD1111 is for indoor use only. Mount the SHD1111 on doors/
windows that need to trigger actions when opened or closed. SHD1111
is usually mounted on front and back doors to provide users the ease of
automation or protection. Additional detectors may also be installed
where security is required.
Note: Be careful when affixing the SHD1111 to a metal frame, or mounting
within 1 meter of metalwork (i.e. radiators, water pipes, etc) as this could
affect the radio range of the device. If necessary, you can space the
magnet and SHD1111 away from the metal surface using a plastic or
wooden spacer.
Operations
1.
The SHD1111 allows 10 minutes for adding to a Z-Wave network at
inital power up.
2.
The SHD1111 goes to sleep mode after 10 minutes if it is not added to
a Z-Wave network. You can wake it up by pressing the tamper switch
until the LED lights up.
Magnet
Summary of Contents for SHD1111
Page 2: ...2 ...
