4
4
You can use the tamper switch at the back of the SHD1111 to include,
exclude, associate with a Z-Wave Network, or reset.
Function
Description
LED Indication
No node ID
The Z-Wave Controller does
not allocate a node ID to the
SHD1111.
On and off repeatedly at a 2-
second interval for 10 minutes
Inclusion
1. Have the Z-Wave Controller
enter inclusion mode.
2. Press the tamper switch 3
times within 1.5 seconds to
enter inclusion mode.
Exclusion
1. Have the Z-Wave Controller
enter exclusion mode.
The LED is on whenever the
tamper switch is pressed.
2. Press the tamper switch 3
times within 1.5 seconds to
enter exclusion mode.
Reset
1. Press the tamper switch
3
times within 1.5 seconds.
2. Within 1 second, press
and hold the tamper switch
until the LED is off.
The LED is on until the reset
process is finished.
3. Node ID has been
excluded, restores to
factory default.
On and off repeatedly at a 2-
second interval
Tamper
Switch
Summary of Contents for SHD1111
Page 2: ...2 ...
