5
Note: See the User’s Guide for the SHD1110’s advanced programming.
Placing the SHD1110
The SHD1110 can be either wall-mounted or freestanding on a table.
Placing on a Table
1.
Insert the table stand into the hole on mounting bracket and turn it 90
degrees clockwise.
Association
1. Have the Z-Wave Controller
enter association mode.
[
] flashes
2. Press
[
]
3 times
within 1.5 seconds to enter
association mode.
3. There are two groupings - 1
and 2. (Refer to Z-Wave's
Groupings in the User’s
Guide.)
• The Z-Wave Controller will display whether the inclusion/exclusion of the
node ID has suceeded or failed.
• For the first 10 minutes after you install the batteries and include the
SHD1110 to your Z-Wave network, it can associate with the Z-Wave
Controller and other nodes automatically. After 10 minutes, you need to
follow the steps in the above table to enter association mode.
Function
Description
LED Indication
