In the
Select Network Protocol
windows, select
Microsoft
from the list of
manufacturers, then select
TCP/IP
from the
Network Protocols
and click
OK
.
3. TCP/IP Configuration
Follow these steps to configure Windows TCP/IP:
In the
Control Panel/Network
window, click the
TCP/IP
entry to select it and
click
Properties
button.
In the
TCP/IP
Properties window, select
obtain an IP address automatically
.
Note: Do not assign any arbitrary IP address and subnet mask to your PCs; otherwise,
you will not be able to access the Internet.
Click the
WINS
configuration tab and select
Disable WINS Resolution
.
Click the
Gateway
tab. Highlight any installed gateways and click the
Remove
button until there are none listed.
Click the
DNS Configuration
tab and select
Disable DNS
.
Click
OK
to save and close the
TCP/IP
properties window.
Click
OK
to close the Network window. You will be prompted to insert your
Windows CD or disk. When the drivers are updated, you will be asked if you
want to restart the PC. Make sure that your Device is powered on before
answering “Yes” to the prompt. Repeat the aforementioned steps for each
Windows PC on your network.
