2.
Check the “
Enable
” box for IPSec VPN.
3.
Select the scenario that best describes your intended VPN connection.
Site-to-site
- Choose this if the remote IPSec router has a static IP address
or a domain name. This SP Gateway can initiate the VPN tunnel.
Site-to-site with Dynamic Peer
- Choose this if the remote IPSec router has
a dynamic IP address. Only the remote IPSec router can initiate the VPN
tunnel.
Remote Access (Server Role)
- Choose this to allow incoming connections
from IPSec VPN clients. The clients have dynamic IP addresses and are also
known as dial-in users. Only the clients can initiate the VPN tunnel.
4.
This case we choose the Application Scenario for “
Site-to-Site
”.
5.
Select the interface for My Address.
6.
Fill in the Peer Gateway Address.
