Power Module Hardware Installation Guide
3
C
HAPTER
1
Power Module Installation
1.1 Overview
Although all modules are hot-swappable, it is recommended you disconnect power or make sure
you are safely grounded and dry before installing or removing power modules.
There is one power module installed in the first power slot of the Switch by default. This section
shows you how to install a second power module or remove the power module.
1.1.1 Installing a Power Module
Use the following procedure to install a power module in the Switch.
1
Use a screwdriver to loosen the screws on a power slot cover and remove it.
2
Grab the handle of the front panel of a power module with one hand and place the other hand under
it to support it.
