manualshive.com logo in svg

ZyXEL Communications Prestige P128, Release Note, Page: 14 / 17

Share
Download
ZyXEL Communications Prestige P128 Release Note Download Page 14

14

Phone

1

Ring   /

Dial tone

--

Call waiting tone

--

Phone

2

--

Ring   /

Dial tone

--

Call waiting tone

2.

 

Two data connections up

Two data connections could be to the same destination or to different destination. Therefore, we
discuss two different cases here.

(1)

 

Both channels are connected to user’s ISP. When a voice incoming call to any DN, one data
connect will be bumped, and the corresponding phone will ring. After user answer the call, if
another voice incoming call to that DN, user will hear call waiting tone and able to flash to
answer the 2

nd

 incoming call.

CASE 1:  Call to DN1 first.

Action 1

Action 2

Action 3

Call to DN1 /

Offhook phone 1

Call to DN2 /

Offhook phone2

call to DN1

Phone

1

Ring   /

Dial tone

--

Call waiting tone

Phone

2

--

Caller get busy tone

/ Busy tone

--

CASE2:  Call to DN2 first

Action 1

Action 2

Action 3

Call to DN2 /

Offhook phone 2

Call to DN1 /

Offhook phone1

call to DN2

Phone

1

--

Caller get busy tone

/ Busy tone

--

Phone

2

Ring   /

Dial tone

--

Call waiting tone

(2)

 

Two channels are connected to different Remote Nodes, such as one to ISP and one to user’s
office network. A voice incoming call to any DN will get busy tone.

Summary of Contents for Prestige P128


















Reviews:

No comments