ZyXEL Communications Prestige 642, User Manual

Page: 19 / 73

Prestige 642 ADSL Modem
2-1
Hardware Installation & Setup
Chapter 2
Hardware Installation & Initial Setup
This chapter describes the physical features of the Prestige
and how to make the cable connections
.
2.1 Front Panel LEDs OF P642
The LED indicators on the front panel indicate the operational status of the Prestige 642. The table below
the diagram describes the LED functions:
Figure 2-1 Prestige 642 Front Panel.
Table 2-1 Front Panel LED Description
PWR The PWR (power) LED is on when power is applied to the Prestige.
SYS A steady on SYS (system) LED indicates the Prestige is on and functioning properly
while an off SYS LED indicates the system is not ready or a malfunction. The
system is rebooting when the SYS LED is blinking.
LAN 10M A steady light indicates a 10Mb Ethernet connection. The LED will blink when data
is being sent/received.
LAN 100M A steady light indicates a 100Mb Ethernet connection. The LED will blink when data
is being sent/received.
ADSL The ADSL LED is on when the Prestige is connected successfully to a DSLAM. The
LED blinks when data is being sent/received. The LED is off when the link is down.
2.2 Prestige 642 Rear Panel and Connections
The following figure shows the rear panel connectors of your Prestige.