Prestige 642 ADSL Modem
Remote Node Configuration
4-1
Chapter 4
Remote Node Configuration
In this chapter, we discuss how to configure a remote node.
A remote node is required for placing calls to a remote gateway. A remote node represents both the remote
gateway and the network behind it across a WAN connection. Note that when you use Menu 4 to set up
Internet access, you are actually configuring one of the remote nodes.
4.1 Remote Node Setup
This section describes the protocol-independent parameters for a remote node.
4.1.1 Remote Node Profile
To configure a remote node, follow these steps:
Step 1.
From the Main Menu, select menu option
1. Remote Node Setup
Step 2.
When Menu 11 appears, as shown below, enter the number of the remote node that you wish to
configure.
Figure 4-1 Menu 11 – Remote Node Setup
When
Menu 11.1 - Remote Node Profile
appears fill in the fields as described in the table that follows to
define this remote profile. The Remote Node Profile Menu Fields table shows how to configure the Remote
Node Menu.
Menu 11 - Remote Node Setup
1. nodename
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter Node # to Edit:
Summary of Contents for Prestige 642
Page 1: ...Prestige 642 ADSL Modem User s Guide Version 2 50 Mar 2000...
Page 14: ......
Page 18: ......
Page 62: ......
