ZyXEL Communications Prestige 128Plus, User Manual, Page: 117 / 203

Prestige 128+ ISDN Router
Dial-In Server Configuration 8-7
IP Pool: IP Start
Addr
This field is applicable only if you selected Yes in the
Dial-In IP Address Supplied By: IP Pool field.
The IP pool contains contiguous IP addresses and this
field specifies the first one in the pool.
IP Count (1,2) In this field, enter the number ( 1 or 2 ,) of addresses in
the IP Pool. For example, if the starting address is
192.168.135.5 and the count is 2, then the pool will
have 192.68.135.5 and 192.68.135.6
1, 2
IPX Net. Num.
Supplied By:
IPX Pool This field tells your Prestige to provide the remote host
with an IPX network number from the pool. Otherwise,
your Prestige will generate a random IPX network
number. Yes/No
(Default =
No )
IPX Start Net
Num
This field is applicable only if you selected Yes in the
Dial-In IPX Net. Num. Supplied By: IPX Pool field.
The IPX pool contains contiguous IPX network numbers
and this field specifies the first one in the pool.
IPX Count (2,16) Enter the number (2 - 16) of network numbers in the
IPX Pool. For example, if the starting number is
12345678, and the count is 2, then the IPX pool will
have 12345678 and 12345679.
2 to 16
Session Options:
Edit Filter
Sets
Press Yes, then [Enter] to edit the filter sets. Keep in
mind that the filter set(s) will only apply to remote dial-in
users but not the remote nodes.
Note that spaces and [-] symbol, are accepted in this
field. For more information on customizing your filter
sets,
see Chapter 9 - Filter Configuration . The default is
blank, i.e., no filters.
Default =
blank
Once you have completed filling in Menu 13 - Default Dial-in Setup, press [Enter] at the
message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any
time to cancel.