ZyXEL Communications Prestige 128Plus, User Manual, Page: 107 / 203

Prestige 128+ ISDN Router
Bridging Setup 7-3
7.2.1 Remote Node Bridging Setup
Follow the procedure in Chapter 5 to configure the protocol-independent
parameters in Menu 11.1 - Remote Node Profile. For bridging-specific
parameters, you need to configure Menu 11.3 - Remote Node Network Layer
Options.
To setup Menu 11.3 - Remote Node Network Layer Options, follow these steps:
Step 1.
In Menu 11.1, make sure the Bridge field is set to
Yes
.
Step 2.
Move the cursor to the Edit IP/IPX/Bridge field, then press the space
bar to select Yes and press [ Enter] to open Menu 11.3 - Network
Layer Options.
Figure 7-2 Menu 11.3 - Remote Node Bridging Options
Menu 11.3 - Remote Node Network Layer Options
IP Options:
Rem IP Addr:
Rem Subnet Mask= N/A
My WAN Addr= N/A
Single User Account= N/A
Server IP Addr= N/A
Metric= N/A
Private= N/A
RIP Direction= N/A
Version= N/A
IPX Options:
Dial-On-Query= No
Rem LAN Net #= 00000000
My WAN Net #= 00000000
Hop Count= 1
Tick Count= 2
W/D Spoofing(min)= 3
SAP/RIP Timeout(min)= 3
Bridge Options:
Dial-On-Broadcast= No
Ethernet Addr Timeout(min)= 0
Enter here to CONFIRM or ESC to CANCEL: