Chapter 3 Web Configurator
PLA6456 User’s Guide
20
Figure 9
IP Screen
The following table describes the labels in this screen.
Table 6 Configuration Screen
LABEL
DESCRIPTION
IPv4 configuration
DHCP enabled
Select
YES
if your PLA is connected to a DHCP-enabled router that can assign it an IPv4 address.
The
IPv4 address / netmask
,
Default Gateway
, and
DNS
fields will be filled automatically when
configuration is received from the DHCPv4 server.
Select
NO
if you wish to assign an IPv4 Address, Subnet Mask, Default Gateway and DNS to your
PLA.
IPv4 address /
netmask
Enter the IPv4 address and subnet mask you wish to assign to your PLA.
This field is only available when you select
No
in the
DHCP enabled
field.
Default
Gateway
Enter the gateway IP address you wish to assign to your PLA.
This field is only available when you select
No
in the
DHCP enabled
field.
DNS
Enter the IPv4 DNS server address you configure manually.
This field is only available when you select
No
in the
DHCP enabled
field.
Click
Ok
for the changes to take effect.
Note: All changes except the DNS server will only take effect after a system reboot.
IPv6 configuration
Summary of Contents for PLA6456
Page 6: ...6 PART I User s Guide...
Page 15: ...15 PART II Technical Reference...
