ZyXEL Communications PLA-401 Series, User Manual

Page: 69 / 92

Chapter 7 Powerline Network Setup Tutorial
PLA-401 Series User’s Guide
69
4
Click Save.
• If you do not type the DAK password or type it incorrectly either of the
following pop-ups appear. Click OK and type the DAK Password correctly in
the DAK Password field.
Figure 45 Incorrect DAK or No DAK
• If you have correctly entered the DAK Password, click OK on the pop-up.
Figure 46 Correct DAK
5
The settings for the adapter will now grey out and the adapter will disappear from
the table after a few minutes.
Figure 47 An Adapter on Your New Network
6
Go back to step 3 in this section to set the same, new Network Name for all
remote adapters you want to add to your new network.