PES-1014 User’s Guide
B
System Parameters
CATEGORY
DEFAULT
VALUE
OPTIONS
NOTE
Set Default Route
N/A
in-band
The default transmission path of the switch
SNMP
SNMP Community
Community
public
1-12 characters
Name an SNMP community (case-sensitive)
Access Right
read-write
read-write/read
The access right of the community member
Trap Receiving
enable
enable/disable
The capability of the community to receive SNMP traps
Status
enable
enable/disable
To activate/deactivate the community for SNMP
management use.
SNMP Host
A management station
IP Address
N/A
users' IP address
Indicate the IP addresses of SNMP hosts
Host Name
N/A
1-12 characters
Give a name to the host (case-sensitive)
Community
N/A
names of the 4
commu.
The community that the management host belongs to (case-
sensitive)
Status
disable
enable/disable
Allow/disallow an IP address to function in SNMP
Port
Port Configuration
Port ID
N/A
any port in the switch Select a port to set its configuration
Port Name
N/A
1-255 characters
Give the selected port a name for convenience (case-
sensitive)
Access Status
enable
enable/disable
Turn on/off access to a port
Connector
TX
N/A
The connector type of the port (FX-fiber port, TX-Ethernet
port)
Security
disable
enable/disable
Turn on/off the capability to discard packets that violate
security parameters
Address Learning
disable
enable/disable
The capability of dynamic address learning
Full Duplex Flow
Control
enable
enable/disable
The capability of 802.3x full duplex flow control
Auto Negotiation
enable
enable/disable
The capability to automatically negotiate transmission rate
and duplex mode
Speed/Duplex
100/Full
100/10-Full, 100/10-
Half
Set the speed (100/10 Mbps) and duplex mode (Full/Half)
Broadcast Storm
Control
enable
enable/disable
The capability to discard broadcast packets exceeding the
threshold number
Port Assignment
Source Port
N/A
any port
A port from which the settings will be duplicated to another
port
Target Port
N/A
port except source
port
A port to which the settings will be duplicated
Item
N/A
1-7 items
Items of settings to be duplicated
