PES-1014 User’s Guide
System
4-3
4.3 System
Configuration
Move the cursor over the
System
link and click
System Configure
to display the
System Configuration
screen
shown next.
Use the
System Configuration
screen to set up functions of the system. It can also set the counter and panel
refreshing time intervals. These settings apply to the whole device.
Figure 4-3 System Configuration
Table 4-2 System Configuration Description
FIELD
DESCRIPTION
EXAMPLE
SuperMac
Enable
or
Disable
the capability of using a more aggressive backing off of
incoming pockets when collisions happen.
When set to
Enable
, the device will use a more aggressive back off algorithm
(back off max. 3 time slots) when collisions occur, instead of using the
standard Ethernet back off algorithm.
When set to
Disable
, the device will use the IEEE802.3 standard exponential
back off algorithm when collisions occur.
Disable
(default)
Aging Control
Enable
or
Disable
the aging time of the forwarding database’s dynamic
entries. The address table is set by automatic address learning (dynamic) or
by manual entry (static). Aging Control is only available to dynamic entries.
Select
Enable
to make the switch age the dynamic address learning entries.
When you select
Disable
, the switch will not age the dynamic address
learning entries.
Enable
(default)
Aging Time
(0.30) min
Configure this field to determine how long a source MAC address can stay in
the address look up table (forwarding database).
Select an
Aging Time
range from 0 to 30 minutes.
10
(default)
Broadcast Storm
Control
Threshold
Use this option to limit the number of consecutive broadcast packets
transmitted to the switch. The available selections are 16, 32, 48 or 64
packets. The PES-1014 discards consecutive incoming broadcast packets
that exceed this number.
48
(default)
