PES-100 Phoneline Ethernet Switch
5 Console Program/Network Management
The switch has an RS-232 console port for local management. The following table
and diagram show the RS-232 pin definitions.
Table 2 RS-232 Pin Definitions
Pin
Description
N/A
2 TX
(Transmit)
3 RX
(Receive)
8 N/A
9
Figure 4 RS-232 DB-9, DCE/female connector
After you make the connection, you can a terminal emulation program to start a
management session. The main screen of console will show the following six
items:
1
4 N/A
5 GND
(Ground)
6 N/A
7 N/A
N/A
1 5
6 9
To connect a terminal directly to the switch, use a standard RS-232 serial cable.
Connect the male end of the RS-232 cable to the console port and the female end
to a COM port on the computer.
1. System
Management
This item is used for system parameters such as IP address, subnet mask,
password, etc.
2. Port
Management
This item is used to enable/disable and to show the status of each network port.
9
