background image

Chapter 3 Device Info Screens

Basic Home Station VDSL2 P8701T User’s Guide

72

3.11  The DHCP Leases Screen

Log into the VDSL Router’s web configurator and click Wireless network > Classic configuration 
> Device Info > DHCP
 to display the VDSL Router’s list of IP address currently leased to DHCP 
clients.

Figure 13   

DHCP Leases Screen

Each field is described in the following table.

Table 11   

DHCP Leases Screen

LABEL

DESCRIPTION

Hostname This 

field 

displays the name used to identify this device on the network (the computer 

name). The VDSL Router learns these from the DHCP client requests. “None” shows here for 
a static DHCP entry.

MAC Address 

This field displays the MAC address to which the IP address is currently assigned or for 
which the IP address is reserved. Click the column’s heading cell to sort the table entries by 
MAC address. Click the heading cell again to reverse the sort order.

IP Address 

This field displays the IP address currently assigned to a DHCP client or reserved for a 
specific MAC address. Click the column’s heading cell to sort the table entries by IP address. 
Click the heading cell again to reverse the sort order.

Expires In 

This field displays how much longer the IP address is leased to the DHCP client.

Summary of Contents for P8701T

















































































































































































































































Reviews: