manualshive.com logo in svg

ZyXEL Communications P841C, User Manual, Page: 32 / 41

Share
Download
ZyXEL Communications P841C User Manual Download Page 32

P841C Central-Side VDSL Modem 

5-4 

Ethernet-Related Commands 

When this flag is on this command automatically displays the P841C (and the subscriber’s VDSL modem’s 
Ethernet statistics if the link is up) every five seconds. Enter the command without “on” or “off” to just show the 
Ethernet monitor status. 

Figure 5-4 Ethernet Monitor Status 

 

Figure 5-5 Enet Monitor Statistics 

Table 5-2 Enet Monitor Statistics 

LABEL

 

DESCRIPTION

 

LT 

The P841C VDSL modem. 

NT 

The subscriber’s VDSL modem (P841). 

TxF and RxF  Transmitting and Receiving Frame count. 

TxB and RxB  Transmitting and Receiving Byte count. 

TxS and RxS  Transmitting and Receiving Throughput in Bytes per second. 

 

 

P841C>enet monitor 
enet monitor flag: off 

P841C>enet mon on 
 
P841C>108:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:681 B:85833 S:1950) 
109:Enet(NT):Tx(F:694 B:90140 S:2709) Rx(F:0 B:0 S:0) 
113:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:815 B:117449 S:6323) 
114:Enet(NT):Tx(F:828 B:119529 S:5877) Rx(F:0 B:0 S:0) 
118:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:876 B:125667 S:1643) 
119:Enet(NT):Tx(F:884 B:126557 S:1405) Rx(F:0 B:0 S:0) 
123:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:934 B:134174 S:1701) 
124:Enet(NT):Tx(F:943 B:134941 S:1676) Rx(F:0 B:0 S:0) 
128:Enet(LT):Tx(F:0 B:0 S:0) Rx(F:980 B:138422 S:849) 
 
P841C>enet mon off 
129:Enet(NT):Tx(F:989 B:139256 S:863) Rx(F:0 B:0 S:0) 

Summary of Contents for P841C










































Reviews:

No comments