manualshive.com logo in svg

ZyXEL Communications P841C, User Manual, Page: 28 / 41

Share
Download
ZyXEL Communications P841C User Manual Download Page 28

P841C Central-Side VDSL Modem 

4-8 

VDSL-Related Commands 

FIELD  

DESCRIPTION 

EXAMPLE 

vdsl auto upgrade NT 
EEPROM flag 

This field shows the VDSL auto upgrade status (“on” or “off”). 
When auto upgrade is on, the P841C will check the 
subscriber’s modem VDSL version and automatically upgrade 
it if it is an earlier version than the P841C’s. 

off 

enet monitor flag 

This field shows the Ethernet monitor flag status (“on” or 
“off”). If this flag is on and the link is up) the P841C display 
P841C and the subscriber’s VDSL modem’s Ethernet 
statistics. 

off 

LT Ethernet speed 

This field shows the P841C Ethernet port speed. 

Auto 

LT Ethernet full duplex flow 
control 

This field shows the P841C Ethernet port flow control status 
(“on” or “off”). 

on 

NT Ethernet speed 

This field shows the P841 (subscriber’s VDSL modem) 
Ethernet port speed. 

Auto 

NT Ethernet full duplex flow 
control 

This field shows the P841 (subscriber’s VDSL modem) 
Ethernet port flow control status (“on” or “off”). 

on 

vdsl disconnect count 

This field displays how many times VDSL connection has 
been disconnected. 

0 

vdsl uptime 

This field displays how long the VDSL link has been up. 

0 secs 

 

4.1.13 VDSL Autoupg Command 

vdsl autoupg [on|off] 

Type this command to show the VDSL auto upgrade status (without “on” or “off”) or turn on/off auto upgrade. 
When auto upgrade is on, the P841C will check the subscriber’s modem VDSL modem code version and 
automatically upgrade it if it is an earlier version than the P841C’s. 

 

Summary of Contents for P841C










































Reviews:

No comments