ZyXEL Communications P-974H - V3.70, Manual

Page: 65 / 116

Chapter 7 Maintenance
P-974H/HW Series User’s Guide
65
The following table describes the labels in this screen.
Figure 23 Maintenance: Diagnostic (Traceroute)
Table 23 Maintenance: Diagnostics (Ping)
LABEL DESCRIPTION
Select Utility
Select either Ping or Traceroute from the Select Utility menu
to choose a test. The screen changes accordingly.
Ping Test
Parameters
Ping Target
Type the IP address or domain name (such as www.example.com) of a
device that you want to ping in order to test a connection.
Ping Size Specify the size of the ping packet the ZyXEL Device is to send. The
default is 64 bytes (56 bytes of data plus 8 bytes for the header). If you
need to determine the Maximum Transmission Unit (MTU) size TCP/IP
connection, change this setting. Otherwise leave it as the default.
No. of Pings Specify the number of ping packets the ZyXEL Device sends to the
target device.
Ping Interval Specify the time (in milliseconds) the ZyXEL Device sends a ping
packet.
Start Test Click Start Test to begin the ping test.
Abort Test Click Abort Test to stop the ping test.
Clear Results Click Clear Results to clear the Results text box.
Results This read-only text box displays the ping test results.