P-793H v 2 Support Notes
Application Notes
General Application Notes
1. Internet Access Using P-793H v2 under Bridge mode
Setup your workstation
Setup your P-793H v2 under bridge mode
If the ISP limits some specific computers to access Internet, that means only
the traffic to/from these computers will be forwarded and the other will be
filtered. In this case, we use P-793H v2 which works as an DSL bridge modem
to connect to the ISP. The ISP will generally give one Internet account and
limit only one computer to access the Internet.
Set up your workstation
(1) Ethernet connection
To connect your computer to the P-793H v2's LAN port, the computer must
have an Ethernet adapter card installed. For connecting a single computer to
the P-793H v2, we use an Ethernet cable.
(2) TCP/IP configuration
In most cases, the IP address of computer is assigned by ISP dynamically so
you have to configure the computer as a DHCP client which obtains the IP from
the ISP using DHCP protocol. The ISP may also provide the gateway, DNS via
DHCP if they are available. Otherwise, please enter the static IP addresses for
all that the ISP gives to you in the network TCP/IP settings. For Windows, we
check the option
'Obtain an IP address automatically'
in its TCP/IP setup,
please see the example shown below.
38
All contents copy right © 2010 Zy XEL Communications Corporation.
