P-793H v 2 Support Notes
The P-793H v2 generates the firewall log immediately when the packet matches
a firewall rule. The log for Default Firewall Policy (LAN to WAN, WAN to LAN,
WAN to WAN) is generated automatically with factory default setting, but you
can customize it in Web Configurator, Advanced setup,
Maintenance -> Logs
->Log Settings.
2. What does the log show to us?
The log supports up to 128 entries. There are 5 columns for each entry. Please
see the example shown below:
3. How do I view the firewall log?
All logs generated in P-793H v2, including firewall logs, IPSec logs, system
logs are migrated to centralized logs. So you can view firewall logs in
Centralized logs: Web Configurator, Advanced setup,
Maintenance ->
Logs ->View
Log.
The log keeps 128 entries, the new entries will overwrite the old entries when
the log has over 128 entries.
Before you can view firewall logs, there are two steps you need to do:
(1) Enable log function in Centralized logs setup via either one of the following
methods,
Web configuration: Advanced Setup,
Maintenance -> Logs -> Log
Settings
,
“Active Log and Alert”
check options depending on your real
situation.
CI command:
sys logs category [access | attack]
(2) Enable log function in firewall default policy or in firewall rules.
After the above two steps, you can view firewall logs via
Web Configurator: Advanced setup,
Maintenance -> Logs ->View
Log.
View the log by CI command:
sys logs disp
You can also view Centralized logs via
or
syslog
, please configure mail
server or Unix Syslog server in Web configuration: Advanced Setup,
Maintenance -> Logs -> Log Settings
.
27
All contents copy right © 2010 Zy XEL Communications Corporation.
