ZyXEL Confidential
340AGL4C0.doc
5/41
Condition: step1:Add a BM rule and save it.
step2:Edit the rule again, and change the bandwidth of the child larger than the
bandwidth of the parent, but it can be saved.
6. [BUG FIX] SPRID: 060706289
Symptom: In GUI, Status page --
＞
WLAN Information--
＞
WEP show is not
correct when set some Security such as WPA,WPA-PSK,WPA2,WPA2-PSK.
Condition: Step1: set Security Mode : Static WEP. The Status page show WEP:64-bit
WEP Step2: set Security Mode : WPA . The Status page still show WEP:64-bit WEP
7. [BUG FIX] SPRID: 060706290
Symptom: The configuration pages in administrator mode can be log in in user mode.
Condition: Step1. log in the user mode. Step2. paste the url of the administrator
configuration page in address bar and press enter,then log in the configuration page.
8. [BUG FIX] SPRID: 060706291
Symptom: Wan /more connections/ NAT edit lead to crash.
Condition: Step1. Restore default setting.
Step2. Enter WAN/More Connections, edit one of the connections, then enter NAT SUA
Only edit. After your apply it, It shows Address Mapping rule to edit, when you apply it,
the device will crash.
Or if you choose Back, then edit the connection again, it will enter Address Mapping
rule edit directly.
9. [BUG FIX] SPRID: 060706292
Symptom: When deleting firewall rules, it has problem.
Condition: Step1. In default setting, add 5~6 firewall rules in GUI.
Step2. Delete one of the rules, two rules may be deleted together and the firewall rule
numbers may be disordered. Step3. It will happen sometimes, but the frequence is very
high.
10. [BUG FIX] SPRID: 060706293
Symptom: When add new rule after rule number 9 ,it will show error.
Condition: step 1.Add nine firewall rules.
step 2.Insert a new rule after rule number 9,it shows "INTERNEL ERROR".
but insert a new rule after rule number 1~8,it can be inserted successfully.
11. [BUG FIX] SPRID: 060706294
Symptom: In GUI bandwidth management, when you add more than nine rules, it will
show ”Number of classes reaches the upper bound. Max classes is 9”
Condition: N/A
12. [BUG FIX] SPRID: 060706295
Symptom: GUI status can’t show correct information.
Condition: When WLAN 4x mode enabled, and one client connect to the AP, the
transmission rate shows 125M in client,but in GUI status shows 54M.
13. [BUG FIX] SPRID: 060706296
Problem Symptom:In GUI-
＞
WAN ,Set two or more remote node, and use same
encapsulation,different VPI/VCI,set static IP. Then delete one rule and set the same
setting in other remote node. Lan PC or device ping the gateway, the device will crash.
Problem Condition:
